Bone Volume Assessment Around Immediate Dental Implant in the Esthetic Area with Immediate Tooth-Like Single Crown Provisionalization: A Laser and Computed Tomography 1-Year Retrospective Study.

PURPOSE: To examine the remodeling process of both the soft and hard tissue components of the postextraction socket around immediately loaded dental implants after tooth extraction in maxillary esthetic areas. MATERIALS AND METHODS: Subjects underwent immediate placement of single implants in postextraction sockets without bone grafting, and their immediate provisionalization with custom tooth-like interim crowns were fabricated using digital diagnostic impressions and a dental milling machine. Intraoperative and 1-year follow-up layered scans of the postextraction sockets after implantation were acquired using a 3D optical system. In the short term, subjects underwent computed tomographic scans. Digital impressions for gingival contours, originally stored as STL (standard tessellation language) files, were converted to DICOM (Digital Imaging and Communications in Medicine) files with the implant shoulder working as a referral point, which were then superimposed to 3D radiologic images. The observed volumetric and linear outcomes were measured using a program known as DentaScan. The width of the alveolar crest at the level of the implant shoulder and marginal bone levels were acquired. Nonparametric tests were applied with a level of significance set at P < .01. RESULTS: No failure was reported after a follow-up of 1 year. Little or no inflammation of the treated areas was registered, and there were practically no signs of suppuration. The areas showed a significant reduction in the overall volumes for both soft and bone tissue, with a P value < .0001 from the baseline (0.983 ± 0.172 cm3) to the 1-year survey (0.865 ± 0.156 cm3). If the soft and bone tissue changes were separately evaluated, a significant loss (with a P value < .0001) was registered for only the bone tissues (from 0.434 ± 0.075 to 0.355 ± 0.061 cm3). Moreover, changes in gingival tissue from baseline to the 1-year survey (-0.040 ± 0.067) appeared to be significantly different from the overall volume loss (-0.118 ± 0.083 cm3). A shrinkage in width (-0.5 ± 0.7 mm) was found from baseline (12.6 ± 0.6 mm) to the 1-year follow-up (12.1 ± 0.9 mm). Marginal bone levels were 0.97 ± 0.70 mm and 0.39 ± 0.78 mm, respectively, at the mesial and distal aspects of the implants. CONCLUSIONS: The present analysis suggested that immediately customized provisionalization was effective enough to prevent both volume loss and linear shrinkage at the layers of the treated areas. Moreover, the buccal aspects seemed to be the areas most affected by the loss of volume. The mean loss in width, which amounted to roughly 0.5 mm, appeared to be negligible when compared to the overall width measured before surgery.

Conventional avulsion versus less traumatic extraction of ankylosed roots with a magnetoelectric device in anterior maxillary areas.

The analysis aimed to compare two different single-tooth extraction surgical approaches in anterior maxillary areas of the ankylosed teeth: less traumatic magneto-electrical (mag) versus conventional tooth extraction (con) in minimizing the adverse effects on post-extractive sockets. Parameters of clinical interest such as intra-surgical fracture of the buccal bone plate, presence of postoperative inflammation, and application of stitches were acquired from medical records. The data were subjected to Pearson's χ2 analysis or to Fisher's exact test with significance at 0.05. Sixty-six hopeless maxillary permanent ankylotic teeth were extracted in the same number of patients. In the mag group 2 incisors suffered a fracture. Two patients out of 40 had signs and symptoms of inflammation that resolved completely within 3 days. In the con group 18 out of 26 patients suffered from buccal alveolar fracture. Six of these patients experienced signs of inflamed tissue. The two groups showed significant differences with p-values ≤0.0009 with regards to fracture (2/38 vs. 18/8) and tissue inflammation variables (2/38 vs. 10/16). A significantly different distribution about the presence of sutures was registered between the mag (4/36) and the con (18/8) group with a p-value <0.0001. Mag group seemed to have reduced frequency of fractured and infected post-extractive sites.

Electron Microscopy (EM) Analysis of Collagen Fibers in the Peri-Implant Soft Tissues around Two Different Abutments.

The design of the implant prosthesis-abutment complex appears crucial for shaping healthy and stable peri-implant soft tissues. The aim of the present animal study was to compare two implants with different healing abutment geometries: a concave design (TEST) and a straight one (CTRL). Transmission electron microscopy (TEM) was used to quantify the three-dimensional topography and morphological properties of collagen at nanoscale resolution. 2 swine were included in the experiment and 6 implants per animal were randomly placed in the left or right hemimandible in either the physiologically mature bone present between the lower canine and first premolar or in the mandibular premolar area, within tooth extraction sites. Each CTRL implant was positioned across from its respective TEST implant on the other side of the jaw. After 12 weeks of healing, 8 specimens (4 CTRL and 4 TEST) were retrieved and prepared for histological and TEM analysis. The results showed a significantly higher percentage of area covered by collagen bundles and average bundle size in TEST implants, as well as a significant decrease in the number of longitudinally oriented bundles with respect to CTRL implants, which is potentially due to the larger size of TEST bundles. These data suggest that a concave transmucosal abutment design serves as a scaffold, favoring the deposition and growth of a well-organized peri-implant collagen structure over the implant platform in the early healing phase, also promoting the convergence of collagen fibers toward the abutment collar.

Assessment of the alveolar bone loss in fresh socket implant procedures with immediate implant loading via temporary preformed anatomical healing caps: Comparison of two different lengths of the implant collar.

PURPOSES: The aim of the present clinical and radiologic retrospective study was to evaluate alveolar bone remodeling, in terms of alveolar width and peri­implant bone level, two years after immediate implant positioning (with two different collar lengths, 0.8 mm and 2.0 mm) and loading of preformed healing cap. The Null hypothesis, H0 is: there was no difference between the two groups of implants. METHODS: Patients suffering from single-tooth edentulous areas in premolar, cuspid, and incisive areas were treated with fresh-socket implants and immediate preformed anatomical healing caps. Each final crown restoration was fabricated 3 months later. Primary outcomes (related to loss of the alveolar width and peri­implant bone level) and secondary outcomes (testing adverse events, and measuring implant/prosthesis survival) were acquired and analyzed. RESULTS: A two-year retrospective analysis was conducted on 31 patients (19 female and 12 male), who underwent dental implant placement with implants having two different lengths of the collar: group A, 0.8 mm, and group B, 2.0 mm. As for the width of the alveolar crest, there was a negligible loss (less than half a millimeter) reported for both the groups, anyway reaching a statistical significance. Preoperative alveolar widths (9.50±0.67 mm and 9.45±0.90 mm, respectively for groups A and B) were different from the two-year alveolar widths (9.20±0.74 mm and 8.93±0.99 mm, respectively for groups A and B) with p-values ≤ 0.0049. When the marginal bone loss was assessed, significant differences were registered between the two procedure groups (-1.42±0.34 mm for group A and -0.11±0.15 mm for group B with a p-value < 0.0001). CONCLUSIONS: The proper design of a healing abutment was very important to preserve the emergence profile immediately after extraction and implant placement. The length of the implant collar used with an immediate healing abutment appeared to affect the preservation of the alveolar crest with predictable final results.

Bone assessment around the delayed dental implant with and without preformed anatomical caps: A 1-year retrospective case-control study.

PURPOSES: To investigate the amount of first-year peri­implant bone loss and the development of the papillae when delayed dental implants loaded with anatomic cover screw and those underwent conventional healing protocol were compared. METHODS: Edentulous healed sites had undergone delayed implants placement. In the anatomical cap group, patients were treated with a guided tissue healing, tooth-like cross-linkable acrylic resin caps had been immediately screwed on dental implants. The marginal loss of the alveolar bone height 1 year after surgery and Jemt's papillae index were obtained. Non-parametric statistics were performed with a level of significance of 1% RESULTS: Forty patients were included in the present retrospective analysis. After a follow-up of 1 year, none of the 40 included implants showed a failure. The Jemt's papilla index was 1.76±0.44 and 1.34±0.50 respectively for guided tissue healing and conventional healing group, without any significant difference. Within the first year of survey a bone loss of -1.27±0.26 mm for conventional healing treatment showed a statistically significant difference (p-value<0.0001) when it was compared to the negligible of the other group (-0.06±0.31 mm). CONCLUSIONS: A guided healing procedure with preformed caps seemed to give better outcomes regarding marginal bone loss and papilla index than those of conventional abutments.

A Comparison of Conical and Cylindrical Implants Inserted in an In Vitro Post-Extraction Model Using Low-Density Polyurethane Foam Blocks.

Combining tooth extraction and implant placement reduces the number of surgical procedures that a patient must undergo. Thus, the present study aimed to compare the stability of two types of conical implants (TAC and INTRALOCK) and another cylindrical one (CYROTH), inserted with a range of angulation of 15-20 degrees in low-density polyurethane blocks (10 and 20 pounds per cubic foot, PCF) with or without a cortical lamina (30 PCF), which potentially mimicked the post-extraction in vivo condition. For this purpose, a total of 120 polyurethane sites were prepared (10 for each implant and condition) and the Insertion Torque (IT), Removal Torque (RT), and Resonance Frequency Analysis (RFA) were measured, following a Three-Way analysis of variance followed by Tukey's post hoc test for the statistical analysis of data. The IT and RT values registered for all implant types were directly proportional to the polyurethane density. The highest IT was registered by INTRALOCK implants in the highest-density block (32.44 ± 3.28 Ncm). In contrast, the highest RFA, a well-known index of Implant Stability Quotient (ISQ), was shown by TAC implants in all clinical situations (up to 63 ISQ in the 20 PCF block without the cortical sheet), especially in lower-density blocks. Although more pre-clinical and clinical studies are required, these results show a better primary stability of TAC conical implants in all tested densities of this post-extraction model, with a higher ISQ, despite their IT.

Preformed customized healing abutments in biologically oriented preparation technique procedure: a 3-year retrospective case-control study.

AIM: To determine the 3-year clinical and dimensional change of the soft tissue following implant placement in healed sites before and after loading with either customized or conventional healing abutments. MATERIALS AND METHODS: Premolar/molar implants were immediately loaded with either provisional and customized abutments without finishing lines according to principles of the Biologically Oriented Preparation Technique (BOPT), test group, or conventional healing abutments, control group. Three months later, the definitive crowns were fabricated. Primary outcomes (changes in the soft tissue) and secondary outcomes (adverse events) had been registered. RESULT: Fifty out of 87 subjects originally included were finally selected for this retrospective analysis: 23 in the test and 27 in the control group. During the first days after surgery 2 adverse events of mucositis, one for each group, occurred. A Few technical complications such as unscrewing 4 screw-retained crowns were recorded. A significant increase in the alveolar width was observed in both groups (test = +2.5±0.5mm, and control = +1.0±0.9mm). The widths appeared to not be merely changed from 3 months to 3 years in both groups. There were no significant differences regarding the width of the keratinized mucosa measured at baseline and after follow-up. Jemt papilla index showed a higher increase in the test group compared with that of the control group. CONCLUSION: Within 3 years of the follow-up period, peri-implant soft tissue outcomes of single, immediately loaded implants with customized healing abutments showed better results in terms of thickness and width when they were compared with those of the conventional group. Side effects count (mucositis and dehiscence) appeared to be very similar between the two groups. In addition, customized healing abutments led to significant augmentation of the alveolar width more than twice that registered in the conventional group.

The New Generation of Subperiosteal Implants for Patient-Specific Treatment of Atrophic Dental Arches: Literature Review and Two Case Reports.

Subperiosteal implants were first introduced in the early 1940s for the treatment of edentulous maxillary and mandibular arches with severe bone atrophy. After achieving widespread popularity in the 80s and 90s, this denture therapy was progressively abandoned due to significant technique limitations, including high rates of infection and the complications and difficulties with positioning implants and obtaining sufficiently extensive bone impressions. In the last two decades, digital technology has dramatically changed the world of implant dentistry. In particular, modern diagnostic imaging, digital technology, and direct metal laser sintering now allow for the projection of implants with the proper extension, leading to the fabrication of custom-made titanium meshes that perfectly fit the specific anatomical requirements of patients. With modern production methods, subperiosteal implants have been digitally reinterpreted, and interest in them is being renewed for the treatment of edentulous patients with atrophic arches. This article describes the evolution of subperiosteal implants in recent years and presents two clinical cases involving the placement of new generation (NG) subperiosteal implants with the clinical and radiographic findings at the 1-year follow-up.

Specific use of the implant stability quotient as a guide to improve healing for patients who had undergone rehabilitation with fixed implant-supported dental prostheses.

PURPOSES: to develop a clinical approach to evaluating osteointegration around bone implants and try to determining which was the correct time of implant loading in different edentulous indications, that is, either properly positioned implants or implants "at risk", generally referred to as implants having increased probability of failure (namely those for which primary stability had been achieved via a time-consuming surgery). MATERIALS: Several implant-supported rehabilitation strategies, with or without bone augmentation procedures, were performed in the upper and lower arches: From 2 to 5 months following implant placement, the prosthetic restorations were performed. A resonance frequency analyzer allowed clinicians to measure intraoperative and postoperative implant stability, then the values of the implant stability quotient, ISQ, ranging from 0 to 100, were registered. ISQs were ranked into 3 levels: Green (ISQ ≥ 70), Yellow (60 ≤ ISQ < 70), and Red (ISQ < 60). Groups were subjected to Pearson's χ2 analysis, with YATES correction when necessary, with a significance level of 0.05. RESULTS: A total of 213 implants had been included. When the distribution of normalized values of ISQ registered for implants inserted in native bone and loaded at 2-3 months (5 Red, 19 Yellow, and 51 Green) was compared to that of native implants loaded after 4-5 months (4 Red, 20 Yellow, and 11 Green), a significative difference was found (p-value = 0.0037). At the time of loading, significance was lost. Significant clinical improvements on the distribution of normalized values of ISQ were apparent for both the implants placed in pristine and those placed in lifted sinuses; no significant differences were registered between the two groups. CONCLUSION: At the loading time, implants considered to be at risk behaved similarly to the native sites for which the overall prosthetic workflow took about few; results confirmed that the mandibular implants appeared to have higher stabilities when compared to maxillary implants at both the intraoperative and the postoperative surveys.

Hemostatic Collagen Sponge with High Porosity Promotes the Proliferation and Adhesion of Fibroblasts and Osteoblasts.

The use of biomaterial for tissue repair involves the interaction between materials and cells, and the coagulum formation represents the first step of tissue healing. This process is particularly critical in the oral cavity, where the wounds are immediately subjected to the masticatory mechanical stress, saliva invasion, and bacterial attack. Therefore, the present study aimed to explore the structural features and the biological activities of a hemostatic collagen sponge on human gingival fibroblasts (HGFs) and human oral osteoblasts (HOBs). The microstructure of the collagen sponge was characterized by a scanning electron microscope (SEM) and histological analysis. The porosity was also calculated. To investigate biological activities, HGFs and HOBs were cultured on the collagen sponges, and their adhesion was observed at SEM on the third day, while cell viability was investigated at the third and seventh days by Tetrazolium (MTT) assay. For osteoblasts seeded on collagen sponge the mineralization ability was also evaluated by alkaline phosphatase (ALP) assay at the seventh day, and by Alizarin red staining on the 14th. Furthermore, the gene expression of ALP and osteocalcin (OCN) was investigated after 3, 7 and 14 days. SEM images of the sponge without cells showed a highly porous 3D structure, confirmed by the measurement of porosity that was more than 90%. The samples cultured were characterized by cells uniformly distributed and adhered to the sponge surface. Proliferation ended up being promoted, as well as the mineralization ability of the osteoblasts, mainly at the mature stage. In conclusion, this collagen sponge could have a potential use for tissue healing.

Clinical and radiographic evaluation of transalveolar two-step osteotome-mediated sinus floor elevation versus sinus augmentation with displacement of the palatal wall in lateral direction coupled to alveolar ridge split technique: A 3-year retrospective study.

INTRODUCTION: The present study aimed to examine the middle-term effects of transcrestal double-sinus elevation (TSFE) versus alveolar/palatal split expansion technique (APS) and simultaneous implant placement in the augmented sinus. NULL HYPOTHESIS: there were no differences between groups. MATERIAL & METHODS: Magnetoelectric device was used for bone augmentation and expansion techniques in long-standing edentulous patients with a deficiency in vertical height in the posterior maxilla (3mm to 4mm residual bone height): TSFE group, or two-stage process with a first transcrestal sinus floor augmentation and a second sinus floor elevation with immediate implant placement; APS group, or "dual split and dislocation" of the two cortical bony plates towards the sinus and palatal side. Volumetric and linear analyses were performed on the superimposed preoperative and postoperative 3-year computed tomography scans. The level of significance was set at 0.05. RESULTS: Thirty patients were selected for the present analysis. For both groups significant differences were found in the volume outcomes between baseline and 3-year follow-up, showing a gain of about +0.28±0.06cm3 for the TSFE group, and +0.43±0.12cm3 for the APS group, with p-values < 0.0001. However, an effective increase of the volume of the alveolar crest was registered just in the APS group (+0.22±0.09cm3). A significant increase in bone width was found in the APS group (+1.45±0.56mm with p-value < 0.0001); on the contrary, a slight width reduction of the alveolar crest was observed in the TSFE group (-0.63±0.21mm). DISCUSSION: TSFE procedure seemed to not affect the shape of the alveolar crest. APS procedures led to a higher increase of the volume available for dental implant placement and could be used in horizontal bone defects too.

Immediate Implant and Customized Healing Abutment Promotes Tissues Regeneration: a 5-year Clinical Report.

INTRODUCTION: Significant alveolar bone resorption follows tooth extraction. Immediate implant placement alone is not sufficient to prevent this phenomenon. CASE PRESENTATION: In this clinical case, a fractured upper first premolar was replaced by an immediate implant and a customized healing abutment designed on the perimeter of the extractive alveolus. After 3 months, the implant was restored. The facial and interdental  soft  tissue  was maintained with  appreciable  success after 5 years. The pre- and 5-year-post-treatment CT scans showed no bone loss. CONCLUSION: The use of an interim customized healing abutment helps preventing hard and soft tissues collapse.  This technique is very straightforward and might represent a smart preservation strategy when there is no indication for adjunctive hard or soft tissue grafting.

Immediate Implant and Customized Healing Abutment for a Periodontally Compromised Socket: 1-Year Follow-Up Retrospective Evaluation.

Immediate dental implant placement with or without immediate loading is reported in daily dentistry and implantology, but these procedures are not common in the case of periradicular and periapical lesions around the tooth needed to be replaced. In the following retrospective evaluation, 10 cases with a 1-year follow-up were selected to propose the technique of an immediate provisional non-loading prosthesis being delivered on the same day of the post-extraction implant placement in multiradicular teeth affected by chronic periradicular and periapical lesions. Post-extractive sockets underwent immediate dental implant placement by filling the empty space with sterile, re-absorbable gelatin sponges. The widths of the alveolar ridge were measured on three-dimensional radiographs before and after the operation, 4 and 12 months later. Non-parametric statistics were performed to compare the outcomes over time with a level of significance of 0.05. Comparing the preoperative cross-sectional images of cone beam computerized tomography (CBCT) scans to the postoperative ones, it was noted that changes in the crestal ridge width, ΔCW, (compared to baseline) were negligible and not clinically appreciable. However, while ΔCW at 4 months appeared to be negative (-0.17 ± 045 mm), crestal width at 12 months was at the same level as the baseline (ΔCW = 0.02 ± 0.48 mm), with a significant difference between 4 and 12 months (p-value = 0.0494). Immediate implant placement with an immediate non-loading provisional customized healing abutment of polyether-ether-ketone placed into the post-extractive sockets with asymptomatic and large chronic periapical and periradicular lesions could represent a further treatment strategy for patients' rehabilitation and soft tissue preservation to replace a hopeless tooth.

Immediate Implant and Customized Healing Abutment Promotes Tissues Regeneration: A 5-Year Clinical Report.

Significant alveolar bone resorption follows tooth extraction. Immediate implant placement alone is not sufficient to prevent this phenomenon. The present study aims at reporting the clinical and radiologic outcome of an immediate implant with a custom healing abutment. In this clinical case, a fractured upper first premolar was replaced by an immediate implant and a customized healing abutment designed on the perimeter of the extractive alveolus. After 3 months, the implant was restored. The facial and interdental soft tissue was maintained with appreciable success after 5 years. The pre-and 5-year post-treatment computerized tomography scans showed bone regeneration of the buccal plate. Use of an interim customized healing abutment helps prevent hard- and soft-tissue collapse and promotes bone regeneration. This technique is straightforward and may represent a smart preservation strategy when there is no indication for adjunctive hard or soft tissue grafting. Given the limited nature of this case report, further studies are needed to confirm the present findings.

Volume assessment of the external contour around immediate implant with or without immediate tooth-like crown provisionalization: A digital intraoral scans study.

PURPOSES: To examine differences between immediate and delayed dental implant loading in maxillary aesthetic areas. METHODS: In this retrospective controlled analysis, 43 subjects who underwent immediate placement of the dental implant in a post-extraction socket were ranked into either immediate (24 implants loaded with non-occlusal tooth-like profile provisional prostheses fabricated by virtual diagnostic impressions and an in-office dental milling machine) or delayed group (19 implants loaded with conventional cover screws and secondary intention healing). Intraoperatively and then four months later, scans of the external layers were acquired with an optical scanner. The width of the alveolar crest and Jemt papilla index were acquired. Non-parametric tests were applied with a level of significance set at p < 0.01. RESULTS: In both groups, the volumes and areas showed significant reductions from the baseline to the 4-month survey. Reductions in volume appeared to be statistically different between the two groups (-39±31 mm3 for the immediate and 89 ± 30 mm3 for the delayed group). The final Jemt papilla index appeared significantly different between the immediate (mesial, 2.5 and, distal, 3) and delayed groups (2 for both aspects). CONCLUSIONS: Immediate provisionalization significantly reduced volume loss and area shrinkage at the external layer when data were compared to a delayed rehabilitation strategy.

Changes in Alveolar Bone Width Following Immediate Implant and Fresh Socket Preservation with Xenogeneic Gap-Filling Material Versus Guided Tissue Healing with Anatomical Tooth-Shaped Caps: A 3-Year Retrospective Case-Control Study.

This study aimed to calculate the 3-year dimensional change in crestal bone width when dental implants placed in postextraction sockets underwent two alternative techniques for alveolar preservation. Fresh sockets that had undergone immediate implant placement were categorized into one of two groups depending on the procedure type. For the xenogeneic biomaterial grafted (BG) group, the gaps between the metallic implant surfaces and the bony walls were filled with corticocancellous porcine bone; in the anatomical cap group, in which patients were treated with guided tissue healing (GTH), cross-linkable acrylic resin caps were immediately screwed on the implants. Absolute measurements of the alveolar width were performed on 3D images acquired before tooth extraction (thereby ensuring correct surgical treatment) and 3 years after surgery. Nonparametric statistics were performed, with the level of significance set at 1%. The results of 46 implants (placed in 36 patients) were analyzed, and 100% survival rates were reported for both groups at 3 years postsurgery. Minor swelling of treated areas was observed the first few days of healing, but neither mucositides, dehiscence events, nor suppurations occurred. At 3 years postsurgery, loss in alveolar ridge width was higher for the BG group (-1.1 ± 0.6 mm) than for the GTH group (0.0 ± 0.3 mm); moreover, these changes were significantly different (P < .0001). This clinical and radiographic data analysis suggests that the implant sites that received a xenogeneic filling material were less effective in maintaining the preoperative alveolar bone width than sites that underwent GTH with immediate implants and anatomical tooth-shaped caps.

Immediate implant and socket preservation using sticky bone and leukocyte-platelet-rich fibrin in the anterior maxilla: A 3-year case report.

INTRODUCTION: Immediate implant in the esthetic area is a challenging procedure. Chronic infection often contributes to extensive bone loss and acute infection often precludes a safe, clean surgery. However, it is quite common to come across failing teeth in the esthetic area, where the patient often demands a faster rehabilitation. CASE PRESENTATION: In this clinical case, a fractured upper central incisor was replaced by an immediate implant, and the perimetrical area was filled with heterologous bone blended with patient-derived leukocyte- and platelet-rich fibrin (L-PRF) in the form of sticky bone. A Maryland bridge was bonded to the adjacent teeth with the intent to guarantee minimum esthetic to the patient. After 5 months, the implant was connected to a definitive abutment and crown. The facial and interdental soft tissue was maintained with appreciable success after 2 years. The pre-treatment and 2-year- post-treatment computed tomography scans revealed marginal bone preservation. CONCLUSION: The use of sticky bone and L-PRF in immediate implant sites helps prevent hard and soft-tissue collapse and may favor faster and sounder healing. KEY POINTS: Why is this case new information? It provides support to the efficacy of immediate implant placement with simultaneous use of L-PRF. What are the keys to successful management of this case? Having L-PRF supporting wound healing. What are the primary limitations to success in this case? Having sufficient bone apical to the existing socket and at adjacent teeth.

Lateral Displacement of Maxillary Sinus Palatal Wall: A 1-Year Retrospective Computerized Tomography Study.

PURPOSE: To examine the short-term outcomes of maxillary sinus augmentations consisting of laterally and apically displacing the palatal wall through a transcrestal approach. MATERIALS AND METHODS: The maxillary sinus floor was fractured in its palatal aspect by allowing a displacement in the buccal and apical direction with a magnetoelectric system. A medial displacement of the alveolar crest in its palatal bony plate was performed at the same time. Crestal bone change was investigated using superimposed preoperative and postsurgical computed tomography scans. Clinical and radiologic outcomes over 1 year were evaluated. RESULTS: A total of 18 implants were selected for retrospective volumetric and linear analyses. Sinus floor and alveolar bone augmentation surgery led to a significant increase in the bone volume (P = .0002) from 0.134 ± 0.060 cm3 to 0.639 ± 0.166 cm3, with an overall gain of +0.504 ± 0.139 cm3. No part of the implant apices appeared to protrude into the maxillary sinus at the 1-year follow-up. The width of the alveolar crest changed from 5.1 ± 0.5 mm to 6.5 ± 0.7 mm, with a significant increase of +1.4 ± 0.6 mm registered at 1 year. However, a marginal bone loss of 1.0 ± 0.8 mm was observed. When tooth positions were investigated, no significant differences between the two groups (premolars versus molars) were found. CONCLUSION: Significant and effective bone gains allowed proper placement of the dental implants but with a minimal loss of peri-implant bone volume.

Guided Tissue Healing by Preformed Anatomical Healing Caps in the Edentulous Ridge: A 2-Year Retrospective Case-Control Study.

The present study evaluated the 2-year changes in soft tissue width after implant placement in healed sites, using two different methodologies to obtain tissue healing: preformed and anatomical abutment caps for customized healing (test) vs conventional healing abutments (control). The null hypothesis was that there would be no difference between the test group and the control group. Patients who suffered from a single-tooth edentulous area in the premolar/molar region were included. Both the standard abutments and the preformed and anatomical abutment caps were immediately screwed on the implants. The final crown restoration was fabricated 3 months later. Primary outcomes (changes in the alveolar soft tissue ridge) and secondary outcomes (testing adverse events and measuring implant/prosthesis survival) were evaluated. Thirty-nine patients (24 women) with a mean age of 57.7 ± 7.1 years (range: 42.6 to 72.8 years) were included. Alveolar widths in both groups showed significant increases from baseline to the 3-month follow-up, with augmentations of 3.6 ± 0.7 mm for the test group and 1.1 ± 0.9 mm for the control group. The gain in soft tissue appeared to be statistically different between the two groups (P < .0001). Contrarily, any subsequent change in width from 3 months to 2 years was negligible and insignificant (< 0.33 mm for both groups). The technique described in the present study encourages the potential for alternative healing based on the guided soft tissue concept, as it either eliminated the need for second-stage surgery or it reduced step-by-step peri-implant soft tissue conditioning, obtaining a tissue contour immediately very similar to that of a final prosthesis.

Alveolar Bone Remodeling with or without Collagen Filling of the Extraction Socket: A High-Resolution X-ray Tomography Animal Study.

The healing process of the tooth extraction socket often leads to significant resorption of the alveolar bone, eventually causing clinical difficulties for future implant-supported rehabilitations. The aim of the present animal study was to evaluate alveolar bone remodeling after tooth extraction in a rabbit model, either with or without the use of a plain collagen plug inside the socket, by means of micro-computed tomography. The study included the micro-tomography analysis of 36 rabbits' incisor extraction sockets, either left empty or filled with a collagen plug. All animals were euthanized in a staggered manner, in order to address molecular, histologic, and radiographic analyses at different time-points, up to 90 days after surgery. The three-dimensional evaluation was carried out using micro-computed tomography technology on excised bone blocks including the alveolus and the contralateral bone. Both linear and volumetric measures were recorded: the percentage of bone volume change (ΔBV) within the region of interest was considered the primary endpoint of the study. The micro-CT analysis revealed mean volumetric changes of -58.1% ± from baseline to 3 months for the control group, and almost no bone loss for the test group, -4.6%. The sockets treated with the collagen plug showed significantly less dimensional resorption, while the natural-healing group showed an evident collapse of the alveolar bone three months after extraction surgery.